How to start the bulldozer

Inspection and preparation: Before starting, you need to check whether there is enough fuel in the tank, whether the battery is fully charged, and whether there is no abnormality in the vehicle. At the same time, make sure that all controls and operating levers are in the automatic or neutral position, and turn off all functions and accessories.

Power on: Insert the key into the ignition switch and turn it to the "on" or "start" position. This will power the electronic system of the forklift and also start the engine preparation process.

Preheat the engine: If the engine is cold, it needs to be preheated. This is usually done by pressing the preheat button and waiting for a while until the engine warms up.

Start the engine: Once the engine is preheated, gently turn the key by hand to the "start" position. At the same time, gently step on the accelerator with your foot to provide a certain amount of oil and gas mixture to the engine. Keep pressing the start switch until you hear the sound of the engine starting.

Monitoring and test run: Once the engine starts, you need to monitor the indicators and instruments on the dashboard to ensure that all indicators are off and the engine speed is stable within the normal range. Then you can do a test run to ensure that everything is normal before starting work.